Ship Factory

Ship Factory
A ship factory
Properties
Resource Requirements
Furnace	1
Iron Block	2
Sign (any)	1
Container (any)	1

Ship factories can print a saved blueprint design (including buildings) at a cost of materials and credits. The blueprint to be printed is selected by rightclicking the sign and entering the blueprint's name in the text field on the factory menu.
Ship factories can be detected with the sign text [shipfactory].
Materials must be placed in the chest. The ship factory can be set to intentionally not print the last block of a material so that pipe systems have an easier time transporting items if the Item Setting "Leave one item remaining" is enabled in the factory's settings menu.
Right click the sign to start the printing process. Materials in the chest will automatically be consumed.

You can also use credit printing for a limited selection of blocks. Credits be withdrawn from your account based on the type of block. Most hull blocks and natural blocks are relatively cheap, but certain components are much more expensive. Additionally, you cannot print mineral blocks or ores.
Blocks will not print if there are not enough materials, the player does not have enough credits, or there are blocks obstructing the printed structure. If only some of the materials for a blueprint are available, the blueprint will be partially printed.
The structure will print starting from two blocks behind the chest (chest - air - blueprint corner). The direction in which the structure was saved will be inherited, regardless of the current direction of the ship factory. By aligning all of the edges of one's ship accordingly, it is possible to use a ship factory to easily repair a damaged starship.
The price of printing each block can be found by type in the table below and on the Horizon's End github repository. Any other block that isn't listed there costs 15c to print.

Advanced Ship Factory

It is also possible to create an advanced ship factory which will pull from a much wider storage system automatically while printing to circumvent the need to cycle items through a single factory chest. The storage chests to be drawn from must extract into a pipe system connected to the stained glass blocks of the advanced ship factory, the advanced ship factory must be powered, and the "Grab from networked pipes" setting must be enabled in the Item Settings portion of the ship factory's menu. Once set up, the advanced ship factory effectively automates the entire printing process.

Advanced Ship Factory
Properties
Resource Requirements
Iron Block	8
Sponge	5
Stained Glass (any)	4
Stair (any)	8
Lodestone	2
Container (any)	2
Note Block	1
Sign (any)	1

Printing Costs

Item	Print Cost (credits)
Bell	250
Dispenser	250
Bone Block	15
Unlisted Blocks	15
Grindstone	12
End Rod	12
Sticky Piston	12
Jukebox	12
Crafting Table	12
Dropper	12
Hopper	12
Chest	12
Furnace	12
All Light Blocks	12
Iron Trapdoor	12
Observer	12
Trapped Chest	12
Barrel	12
Lodestone	12
All Planks	12
All Stone	12
All Granite	12
All Andesite	12
All Diorite	12
All Deepslate	12
All Sandstone	12
All Red Sandstone	12
Mud Bricks	12
All Blackstone	12
All Nether Bricks	12
All Quartz	12
All Purpur	12
All Prismarine	12
All End Stone	12
Obsidian	12
Smooth Basalt	12
Polished Basalt	12
Amethyst Block	12
All Concrete	12
All Glass Pane	12
All Slabs	12
All Stairs	12
All Walls	12
All Stained Terracotta	12
All Glazed Terracotta	12
All Signs	12
Sponge	5
Piston	5
Lever	5
Iron Bars	5
Cobblestone	5
Bricks	5
Dirt	5
Grass Block	5
Short Grass	5
Calcite	5
Podzol	5
Mycelium	5
Coarse Dirt	5
Rooted Dirt	5
Farmland	5
Mud	5
Clay	5
Gravel	5
Sand	5
All Ice	5
Snow Block	5
Moss Block	5
Tuff	5
Crying Obsidian	5
Crimson and Warped Nylium	5
Soul Sand	5
Soul Soil	5
Basalt	5
All Concrete Powder	5

How to print ships

While piloting a ship, run the command /blueprint save (name_of_your_ship)
This will create a save state for your ship in the current configuration.

On your ship factory sign, write in the words as described above

How to print buildings

Buildings can contain blocks that are illegal in starships. This makes a challenge in piloting a building as a ship.

The method for saving a building requires utilizing the worldedit plug-in.

1. using worldedit, select the area containing building
2. run the command //replace {whatever color} concrete.

This will replace all your builds blocks with concrete that IS pilotable.

1. place a jukebox near or on your building and using a clock, left click it as you would to register a ship.
2. register the building as a shipfactory and right click with a clock to pilot it
3. run the worldedit command //undo
4. run the `/save blueprint (name_of_building) just as you would with a ship

/release the ship/building and follow the same steps to print as you would with a ship